[Prev][Next][Index][Thread]

RE: multiple gap question



Is it possibly that the phase to one or your paralleled NST's needs to be
reversed?  If you can't jump a .018" gap, your voltage is lacking.  With
nothing else hooked up to the paralleled NSTs, can you draw an arc from each
HV terminal to the case?

Gary Lau
Waltham, MA USA

>>>The mmc is at 0.011 uF. Not even a gap of 0.018-0.020 will fill a 0.022
uF mmc.
 
>>You mean to say that with a  _single_  .018-.020 gap, it won't break down 
>>when charging a .022uF cap?

>Yep! Nary a spit with a 15/60 in parallel with a 15/30. And the NSTs have 
>been checked by
>meter and used in the circuit. The gap is a 3-ball adjustable gap.    
->-O O O--

>> I use a 15/60 with a .02uF cap and it runs quite nicely with a 0.34" (not
0.034") gap.
>>Something is wrong, and it's not the gap.
.

>Happy day,
>Ralph Zekelman