[Prev][Next][Index][Thread]

Re: Magnet Wire



> Original Poster: "Ryan Ries" <spud-at-wf-dot-net>

Hi Ryan,

The 17 ga. wire will be fine. Not sure what the specs are on the other
components, but I would definately go for the 8 inch secondary about 37 to 40
inches long. This will put you in the ball park of 750 - 800 turns, an h/d
ration of 4.5:1 - 5:1, and an inductance of 22 - 24mH. You should be able to
mesh the rest of your components into the circuit with a little primary
modification.

Bart

>
> Greetings...  I recently acquired a great deal of magnet wire.  (Excellent
> since I still don't have another secondary after my last one blew up.)
> But, it is 17 Guage wire.  That is really big wire.  Will it still be okay?
>  What is the best way to compensate? (Longer secondary, wider secondary?)
> I plan on winding a 6-8 inch secondary.
>
>         Thanks,
>              Ryan