Re: beer bottle cap question

• To: tesla-at-pupman-dot-com
• Subject: Re: beer bottle cap question
• From: "ross andrews" <sflourine-at-home-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 14 Feb 2000 22:42:07 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

	
Hi Kelly,	

	In my short experiance with beer bottle caps I have found that any old
capacitance meter will do the job.  As for voltage, if the bottle
shatters, that was too much.  :)  (You could prolly calculate it based
on the glass thickness, composition, how uniform the glass is, if you
wanna nit-pick).

	Ross

Tesla List wrote:
> 
> Original Poster: "Kelly Shutt" <tcatut-at-mail.utexas.edu>
> 
> What's the easiest/cheapest way to measure the capacitance and voltage
> ratings of my beer bottle caps?
> 
> Thanks,
> Kelly

• Prev: Re: Looking for 3 lbs # 24 - 26 Magnet Wire
• Next: Re: Initial setting for sync phase angle on an RSG
• Index(es):
  • Main
  • Thread