HIGH POWER TUBES FOR SALE

• To: tesla-at-pupman-dot-com
• Subject: HIGH POWER TUBES FOR SALE
• From: Norman Hockler <norsan-at-bright-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sat, 12 Feb 2000 12:41:40 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

>Coilers,


For those interested in tube TC's I have some Eimac YC-156 tubes.  This 
tube is a ceraminc high mu triode and are pulls from MRI machines and are 
tested and have full output.

The tube is rated at 5000 watt plate dissipation.

Max plate voltage 6500 V
Plate current 1A .  Plate current in pulsed service up to 64 amps
Filament  voltage  is 15 V -at- 15 A.

The tube does not need a socket.  The tube is made to sit in a clear hole 
with the grid ring bolted to the chassis.  Filament connections are via 
8-32 screws.

I have the Eimac spec sheets and I can send you a jpeg of the tube if your 
interested.

Tube is 9" high and 5" in diameter.

Contact me direct.

Norm

• Prev: RE: Equality
• Next: Re: Pacmakers and Tesla coils = bad??
• Index(es):
  • Main
  • Thread