[Prev][Next][Index][Thread]
Re: Stacking Variacs - shaft material
At 11:45 AM 08/02/00 -0700, you wrote:
>Original Poster: Eric Leighton <ELeighton-at-portdiscovery-dot-org>
>
>I want to stack the two 10A variacs I have, and want to know what material
>the shared shaft has to be. The original shaft is 3/8" aluminum, and I have
>some 3/8" stainless tubing that I think will work, as long as it doesn't
>have to be aluminum. I figured that plain old (magnetic) steel might not be
>so good for a shaft that goes through the core, no?
>
>Eric Forsman
>Baltimore
>
Hello Eric:
Go to any farm supply shop or co-op and get a fiberglass electric fence
post which just happen to be 3/8 inch in diameter. They are strong, an
electrical insulator, and non-magnetic...just what you want.
>
>
73, Weazle, VE3EAR/VE3WZL
Listening: 147.030+ and 442.075+
E-mail: weazle-at-hurontel.on.ca
or ve3ear-at-rac.ca
Web site: www.hurontel.on.ca/~weazle