[Prev][Next][Index][Thread]

Re: Primary-Secondary spacing



><< Original Poster: "Christopher Boden" <chrisboden-at-hotmail-dot-com>
>
>  We are building the primary mounts this week and I am wondering the best
>  spaceing for the Primary in relation to the secondary.
>
>  The secondary is wound on a 6" form and is moveable in the Z axis so that 
>we
>  can adjust coupling.
>
>  The primary forms create a .75" gap to the first turn (each side) if the
>  primary form is almost touching the sec, is this enough?
>
>  The primary supports are made from 1/2? UHMW and will be bolted to a 
>2'dia X
>  1/2" thick UHMW plate with nylon bolts.
>   >>
>-snip-
>
>Chris,
>
>The inside diameter of the primary on my 6" coil is 8.0".  .75" seems a
>little too close to me.
>
>Ed Sonderman
>
>

Finally my UHMW disks came in today. I really love this stuff.

I will be making the Primary 1'st turn start at a minimum dia, of 9" with a 
6" sec. That gives me the 1.5" recomended clearance.

Thank's guys, once again you saved my butt. :)





whos-at-geekgroup-dot-org ? Heck I dunno, whos-at-geekgroup-dot-org ?
Chris Boden, that's who!

Christopher A. Boden Esq.
President / Founder
The Geek Group
Because the Geek shall inherit the Earth!
www.geekgroup-dot-org