Re: Primary-Secondary spacing

• To: tesla-at-pupman-dot-com
• Subject: Re: Primary-Secondary spacing
• From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Tue, 08 Feb 2000 11:43:06 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

In a message dated 00-02-08 03:44:52 EST, you write:

<<  The primary forms create a .75" gap to the first turn (each side) if the 
>  primary form is almost touching the sec, is this enough?
  
 > Chris, >>

Chris,

If this is a pancake primary with NST, it may be just enough.  My TC
that gave 65" sparks had 1" between pri and sec (each side), and it
was OK.  Especially if you keep the secondary raised about 1" or so
which you probably will, then it should be OK.

Cheers,
John Freau

• Prev: Stacking Variacs - shaft material
• Next: Re: Pancake coils
• Index(es):
  • Main
  • Thread