[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: More Coupling...
Original poster: "Marco Denicolai by way of Terry Fritz <twftesla-at-uswest-dot-net>" <Marco.Denicolai-at-tellabs.fi>
Hi Bart.
I have measured some time ago Thor's coupling coeff. and reported my
results at:
http://www.saunalahti.fi/dncmrc/th_ccoef.htm
I can't recall if Paul has already used my data or not.
The measure was taken by first measuring Lprimary and Lsecondary, then
Lprimary+secondary (in series) at different primary height.
>From that M was derived and then k.
I got a pretty linear curve: the little curvature near k=0.12 is probably
due to
the fact that I was forced to change a connection lead for
that measurement point.
Regards
"Tesla list" <tesla-at-pupman-dot-com> on 22.12.2000 04:28:02
To: tesla-at-pupman-dot-com
cc: (bcc: Marco Denicolai/MARTIS)
Subject: Re: More Coupling...
Original poster: "Barton B. Anderson by way of Terry Fritz
<twftesla-at-uswest-dot-net>" <tesla123-at-pacbell-dot-net>
Hi Paul and Everyone,
My reply here is to ask (plead) for more coiers to make coupling measurements.
All that is needed is a DMM capable of volt and amp readings (or meters capable
of this). Also needed is a primary that can be moved above and below the
secondary base line in steps (or the secondary to achieve the same result).
Measurement is easy (we can define that later).
If case you haven't kept up with this thread, I have found an increase in
coupling error to Paul's program "acmi" predictions (error increases in the
direction of increased coupling). What I would like to find out with your help
is:
1. is current changing during measurement (and not realized),
2. is the flat primary shape causing the error,
3. if #2 is correct, does acmi need to apply a correction of some type,
4. if #3, is this true for only flat primary's?
5. Lot's of other little tid bits to increase our coupling knowledge.
So we need some flat, helical, and conical coupling measurements as well. This
type of comparison has been needed for some time and the information will add
another little wrinkle in our coiling brains.
Any takers? Anyone?
Thanks,
Bart