Re: Small TC experiments

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-uswest-dot-net>" <evp-at-pacbell-dot-net>

Tesla list wrote:
> 
> Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<paul-at-abelian.demon.co.uk>
> 
> Ed Phillips <evp-at-pacbell-dot-net> wrote:
> 
> > I just looked at your site and didn't find the *.exe file.
> > Where can it be found?
> 
> It's under the directory URL
> 
>   http://www.abelian.demon.co.uk/acmi/
> 
> dr-x   2      4096  Dec 15 11:56  ./
> dr-x  10      4096  Dec 13 10:29  ../
> -r--   1      1828  Dec 13 06:20  README
> -r--   1     11164  Dec 13 06:20  acmi.c
> -r--   1     29316  Dec 15 11:56  acmi.exe  <-----
> -r--   1       526  Dec 15 11:56  bart.in
> -r--   1       559  Dec 13 06:22  flat.in
> -r--   1        47  Oct  4 22:09  makefile
> -r--   1       715  Oct  4 20:50  test.in
> 
> along with the input file for Bart's flat primary coupling,
> which might be a good one to pick as a template.
> 
> Let me know how you get on with it.
> 
> Cheers,
> --
> Paul Nicholson,
> Manchester, UK.
> --

Paul:

	Found it OK AFTER I had sent this note.  Had it just gotten there or
did I overlook it before.  First attempt at running it has been a
failure.  Running under DOS prompt I always get the statement:

	"error in input file:  Line 1: unrecognized statement"

no matter what file name I enter.  Don't know whether this is due to a
file problem or whether it's not looking for the file in the same
directory and there is nothing there.  Will try this some more booting
from a DOS disk to see if I can handle the problem, then may ask for
more help.  I'm not any good with DOS!

	By the way, was the sample input file you send EXACTLY what you intend
acmi to read, including all comments and punctuation?

Ed

Ed