Re: Cadence/OrCad/MicroSim 9.2

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Barton B. Anderson by way of Terry Fritz <twftesla-at-uswest-dot-net>" <tesla123-at-pacbell-dot-net>

More FYI,

There "is" an eval version of 9.2 (also have it at work). The two are not
backwards
compatible. (9.2 can read 8.0 schematics, but 8.0 can't read 9.2 schematics).

Bart

Tesla list wrote:

> Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<Rscopper-at-aol-dot-com>
>
> FYI,
>
> Cadence has purchased OrCad, version 9.2 is now out (I have it at work) But I
> don't think there is an eval version of 9.2 (might be one - haven't looked).
>
> For 9.2 they brought back Schematics - the schematic capture front end from
> old MicroSim if you want to use it.
>
> R. Scott Coppersmith