[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
large caps
Original poster: "Matt Skidmore by way of Terry Fritz <twftesla-at-uswest-dot-net>" <fox-at-gwydion.woozle-dot-org>
Hi,
ive recently found a large cap rated 15,000 VDC and 600 VAC at 60 MFD. i
was wondering if this might be a good cap to use on my coil using a 15/30
NST power supply even though its only rated for 600 VAC.
also, looking through some pictures i noticed one like the fritz filter,
but using half the components of the original design. the original design
is rated for 240 ma so this smaller filter should do fine for the above
mentioned NST?
-fox