Re: MMC voltage rating for 15/60NST (fwd)

["Tesla list" <tesla-at-xxxxxxxxxx>]

Original poster: Tesla List Moderator <mod1-at-poodle.pupman-dot-com>



---------- Forwarded message ----------
Date: Wed, 6 Dec 2000 21:23:56 -0700
From: Steve & Jackie Young <youngs-at-konnections-dot-com>
To: Tesla list <tesla-at-pupman-dot-com>
Subject: Re: MMC voltage rating for 15/60NST (fwd)

Yes, but you need to put a few in series to withstand the voltage across the
cap.  Usually the resistors are rated for only 250 volts, but can probably
handle 500.  So 4 in series for each 1600 volt cap would work.  At a penny
each, the only pain of multiple resistors is more soldering.
--Steve

----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-poodle.pupman-dot-com>
Sent: Wednesday, December 06, 2000 7:48 AM
Subject: MMC voltage rating for 15/60NST (fwd)


> Original poster: Tesla List Moderator <mod1-at-poodle.pupman-dot-com>
>
>SNIP<
> Also, are standard 1/4W 5% carbon film resistors suitable for MMC use?
>
> Thanks,
> Seth Fischer
>
>
>