Re: question about SG

[Esondrmn-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

In a message dated 8/27/00 7:43:38 AM Pacific Daylight Time, tesla-at-pupman-dot-com 
writes:

<< 
 hi,
 I was using WinTesla to figure my gap width for a RQ/TCBOR style gap and it
 states that I should space
 my gaps a .1339in.(8 gaps) for a 9kV 30mA input....
 but this would give me a overall gap width of 1.0712in.
 Does this seem a little large or is it just me??
 
 Thanks for any help,
 Kevin D.
 
  >>
Kevin,

I haven't looked at that program, but you are correct - that is way too 
large.  .13" total sounds about right to me.  With 8 gaps of .016 each.  I 
use 5 gaps of .030" each for my 12 kv, 60 ma system.

Ed Sonderman