RE: Oops! My mistake! (was: Getting Closer to First Light with 10KVA Pig)

["David Dean" <deano-at-corridor-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Hi Ryan,

Yes, that is correct.
Now it looks as though you are ready to ballast it.

later
deano

> -----Original Message-----
> From: Tesla list [mailto:tesla-at-pupman-dot-com]
> Sent: Tuesday, August 22, 2000 12:28 PM
> To: tesla-at-pupman-dot-com
> Subject: Oops! My mistake! (was: Getting Closer to First Light with
> 10KVA Pig)
>
>
> Original poster: "Ryan Ries" <spud-at-wf-dot-net>
>
> 	You guys were right and I was wrong about the voltages on
> the pig.  It is
> a 14.4/24.9Y and not some weird 28.8.  Sorry for the mistake.  So, here is
> what I have gathered:
> 	When I apply 120 volts to the HV terminals on the pig, I
> read exactly 2
> volts across X1 and X3 LV terminals (leaving X2, the center terminal,
> alone).  Thus, a 60:1 turns ratio.  So, if I put 240v (42 amps)
> into X1 and
> X3, I would get 14.4Kv (10KVA) out the HV terminals, correct?
>
> 	Thanks,
> 	    Ryan Ries
>
>
>