Re: G10 (cutting a disk)

• To: tesla-at-pupman-dot-com
• Subject: Re: G10 (cutting a disk)
• From: sdate-at-gte-dot-net (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 27 Apr 2000 17:16:14 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Dr. Resonance, anyone....

What "special abrasive blade" is required to cut G-10??

I just received a sheet from McMaster-Carr (1/2"X12"x24") and don't want
to waste too many bandsaw blades.  Called McM-C and they called the mfgr
who said to use carbide drills, etc.... but no info on how to cut it.

Thanx for any ideas,

Steve - Seattle

******************************************
> Original Poster: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net>
 
> You need a special abrasive blade in your bandsaw to effectively cut G-10.
> If you cut it on your standard blade the blade is trash.
 
> Regards,
 
> Dr. Resonance

• Prev: Re: Better Gap Worth Effort
• Next: RE: SRSG,RSG, shtuff...
• Index(es):
  • Main
  • Thread