RE: 7200 V too low?

• To: tesla-at-pupman-dot-com
• Subject: RE: 7200 V too low?
• From: "Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 14 Apr 2000 17:59:53 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Nathan,

Ask them for two 7200v potential transformers (single bushing ones work
nice). Hook the LV sides in parallel and bond the cases together. You'll
have a super NST (without current limiting). These can easily be pushed into
the 3kw range.

Regards,
Brian B.



Tesla List wrote:
> 
> Original Poster: "Nathan Ball" <nateburg-at-hotmail-dot-com>
> 
> Hi everyone
> 
> Checking with my dad's power company, all of the distribution transformers
> in my town are at 7200 V.  I may still be able to get one if i'm
persistant,
> but is 7200 going to run an appx. 3 kVA coil OK, or should I look for a
> 14.4?
> 
> Thanks,
> Nathan
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail-dot-com

• Prev: Re: List.
• Next: Re: Torque needed to spin the secondary?
• Index(es):
  • Main
  • Thread