Re: High speed RSG

• To: tesla-at-pupman-dot-com
• Subject: Re: High speed RSG
• From: "Max Erhard" <max.erhard-at-softhome-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 13 Apr 2000 14:52:47 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

You could call it a vernier gap I suppose.

Tesla List wrote:
> 
> Original Poster: "Michael Tucknott" <Michael.Tucknott-at-virgin-dot-net>
> 
> Hi Rainer Schwemmer
> Just to let you know, it has been done before my a bloke called Tesla
> ;-)
> He used two rotating brass disks with odd numbers of teeth on to give
> the
> high
> break rate.
> Also some years ago Richard Hull(member of the TCBOR) built a simular
> gap.
> 
> Tesla-been there-done that-did he invent Tee shirts???????????
> 
> Cheers Mike Tucknott
> 
> > To go even further one could make a gap comprising two disks rotating
> > in opposite directions, with one having 10 and the other havin 11
> > electrodes for doubling the bps-rate, making 2400 bps for our example.
> 
> > But i think that such high brake rates are useless for tesla coil
> > operation unless you don't have a realy big transformer.
> >
> 
> --------------------------------------------------------
> I like having low self-esteem.
> It makes me feel special.(Q-Jane Lane)
> 
> http://freespace.virgin-dot-net/michael.tucknott/tesla.htm
> --------------------------------------------------------

• Prev: Re: Torque needed to spin the secondary?
• Next: Re:laser comment(was: Coil ideas for experiments)
• Index(es):
  • Main
  • Thread