Re: Equidrive-ing me crazy
Subject: Re: Equidrive-ing me crazy
From: Terry Fritz <twftesla-at-uswest-dot-net>
Date: Fri, 05 May 2000 17:17:19 -0600
Each cap would then have to be 0.04 uf. When you put them in series, as
in equidrive, you get back to 0.02uF again. "I" can't think of any reason
equidrive whould have an advantage but let us know if you notice anything...
At 03:26 PM 05/05/2000 -0500, you wrote:
>I am curious about the capacitor size when they are placed in the
>"equidrive" position. Say you have a coil that runs perfectly fine with
>.02 uf wired in series with you primary coil...to run the equidrive, do
>you need EXACTLY half (.01 uf) at each location? Or do you need EXACTLY
>twice the total (.04 uf) because the caps are now wired in parallel to
>YOU'RE PAYING TOO MUCH FOR THE INTERNET!
>Juno now offers FREE Internet Access!
>Try it today - there's no risk! For your FREE software, visit: