RE: Odd Overloaded NST Effect

Just a thought, and probably moot, but you did phase them 1 at a time,
marking the terminals and the order they're hooked up in, right?  I have 4
12/30s, and everything is marked, but sometimes I mess it up...

Just the $.01 from the village halfwit ;)

-----Original Message-----
From: Tesla List [mailto:tesla-at-pupman-dot-com]
Sent: Monday, May 01, 2000 8:04 PM
To: tesla-at-pupman-dot-com
Subject: Re: Odd Overloaded NST Effect

Original Poster: Terry Fritz <twftesla-at-uswest-dot-net>

Hi Ryan,

	Apparently, some neon sign shops use many paralleled NST for cheap
bombarders.  I don't "know" of any problems but they may be something we
don't know.  O:-|

I would carefully check each one to be sure they are all working.  If one
is shorting, the high current being dumped into a bad one could do odd
things.  If you can't find a problem you may try removing them one at a
time to see if one is causing the problem.  Beyond that, you may be seeing
something we are not aware of...



At 06:52 PM 05/01/2000 -0500, you wrote:
>	I have 6 15Kv-at-30mA transformers connected together for a monsterous output
>of 180mA; at least theoretically.  The current from my mains supply goes
>through my variac first, which has a built-in voltmeter.  When I apply
>power to my transformer bank, I notice the voltmeter goes CRAZY, swaying
>back and forth between about 90 and 145 volts.  I heard someone recently
>talking about the voltage field collapsing as the current field goes too
>high in an NST, or something wacky like that.  The last time I asked how
>many NSTs could be paralleled successfully however, the only response I got
>was "there shouldn't be any limit".  So, what do you think is the deal?
>	-- Ryan Ries