[Prev][Next][Index][Thread]

Re: its up and running



Don't let your pig BBQ too many bunnies over there (heh heh heh).


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Tuesday, September 07, 1999 4:48 AM
Subject: its up and running


>Original Poster: BunnyKiller <bigfoo39-at-idt-dot-net> 
>
>Hi all,
>
>    just wanted to update yall on my present project. I recieved the
>polepig from Dr Rez. and ( they look smaller when hanging on the pole)
>tested it out with a Jacobs ladder first, impressive to say the least.
>Any way....  I decided that the pig was way too big ( size wise)  so I
>opened it up and took a look and wrote down the schematics...  I pulled
>the switch out , hard wired the transformer, cut the can down to 18"
>height and put it back together. The piggy is now 27" tall instead of
>42" this is much nicer to look at and makes it alot easier to design a
>case for now. I am using my 8 " secondary with the new transformer and
>talk about impressive....    depending on the gap width , I get either
>single Very strong streamer or multiple streamers that are very active.
>I havent made any exact measures on streamer length but I would guess at
>this point they are doing an easy 6 foot.
>( and this is the low power setting on the welder) (( but in all
>actuality I dont see much difference between hi and low power settings
>)) what seems to be the main performance factor is the gap setting (
>btw  is a single gap inside of a flattened PVC pipe more oval shaped...
>with a shop vac attached to the bottom of the pipe  works great too )
>....
>
>I am working on a RSG and expect it to be finished in about a week  ...
>its a 9.5" disc with the electrodes set at the 9" dia point. I plan to
>spin it at 1725 rpm with 8 studs on it ...
>
>
>QUESTION time ....      have any of you had any ideas or experiences
>with combining the rotary and a RQG system????    If you have id like to
>know what the results were before I put alot of time into building it.
>
>
>and thats about it for the moment  Im gonna go play ;) ....
>
>
>ohhhhh   btw    Dr. Rez ...   you are a god ..  ;)
>
>
>Scot D
>
>
>