RE: Using sync gaps

• To: tesla-at-pupman-dot-com
• Subject: RE: Using sync gaps
• From: "Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Wed, 30 Sep 1998 19:08:26 -0600
• Approved: terryf-at-verinet-dot-com

John/Ed,

My "current" goal it to get the longest spark I can utilizing a 20A 120V
circuit (i.e.. 2400w including control and blower power). 

But I must admit that my 60A 240V outlet and my 200A 240V sub-panel are
calling to me :')

Regards,
Brian D. Basura

> ----------
> From: 	Tesla List[SMTP:tesla-at-pupman-dot-com]
> Sent: 	September 28, 1998 4:12 PM
> To: 	tesla-at-pupman-dot-com
> Subject: 	Re: Using sync gaps
> 
> Original Poster: Esondrmn-at-aol-dot-com 
> 
> In a message dated 9/27/98 9:14:22 PM Pacific Daylight Time,
> tesla-at-pupman-dot-com
> writes:
> 
> - snip - 
> 
> << 
>  Bart, all,
>  
	<snip>
> If you've
>  got power to spare, raising the break rate of any 120 BPS TC
>  will increase the spark output.  This is not the question.  The
>  question is efficiency.
>  
>  John Freau  >>
> 
> John, for some, I guess the challenge is to produce the longest sparks
> with
> the least amount of power into the system.  For me, I rate the performance
> of
> my coils by the longest sparks achieved for a particular size (diameter)
> secondary- regardless of the input power (within reason) - where I live
> power
> is cheap.
> 
> Ed Sonderman
> 
> 

• Prev: Re: Self-built power transformer
• Next: Re: Re New cap
• Index(es):
  • Main
  • Thread