Primary Coil

• To: tesla-at-pupman-dot-com
• Subject: Primary Coil
• From: Chris Mason <n_atriu_m-at-start-dot-com.au> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 14 Oct 1999 18:36:56 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

  I am making a 4.5" x 30" TC and am going 
  to wind 3/8" Cu tubing helical wound on
  a 45 degree angle. Though the secondary
  coils 1st wind ended up around 1.5" above
  the primarys 1st wind will this undercouple
  my TC? I would also appriciate any tips on
  perfecting my design. BTW.. I am using a
  15KV 60ma NST

 Chris

__________________________________________________________________
Get your free Australian email account at http://www.start-dot-com.au/

• Prev: Re: MMC equalizing resistors (fwd)
• Next: Re: Ozone filters/absorbers (fwd)
• Index(es):
  • Main
  • Thread