Re: Coil Winder (fwd)

• To: tesla-at-pupman-dot-com
• Subject: Re: Coil Winder (fwd)
• From: Tesla List <mod1-at-pupman-dot-com>
• Date: Mon, 11 Oct 1999 22:22:35 -0600 (MDT)
• Approved: mod1-at-pupman-dot-com

---------- Forwarded message ----------
Date: Mon, 11 Oct 1999 20:50:37 EDT
From: Parpp807-at-aol-dot-com
To: tesla-at-pupman-dot-com
Subject: Re: Coil Winder (fwd)

In a message dated 10/11/99 4:07:21 PM Central Daylight Time, 
tesla-at-pupman-dot-com writes:

<< You can also use a small square piece of plywood, with some blocks of 1x3
 nailed on at the right radius, which is a whole lot easier than trying to
 cut a nice circle out of plywood (unless you have a good band saw and jig,
 for which cutting circles is easy). >>

I use a fly cutter to cut beveled washers out of 3/8 - 1/2 inch plywood. The 
centering is almost automatic. After a while you get a collection of washers 
for different size
forms.

Popping corn in Indiana
Zeke

• Prev: Re: My First TC (fwd)
• Next: free parts (fwd)
• Index(es):
  • Main
  • Thread