Re: Needed - Neon Transformer -Reply

• To: tesla-at-pupman-dot-com
• Subject: Re: Needed - Neon Transformer -Reply
• From: "Gregory R. Hunter" <ghunter-at-accucomm-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 17 May 1999 22:16:20 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

9KV -at- 60ma?  Are you sure?  Isn't that mighty big for an OBIT?  All the
ones I've seen were dinky 20ma units in the $50 range.  What city are you
in?  I'd like to visit your Home Depot and pick up a couple of those.

Greg

At 04:15 PM 5/16/99 -0600, you wrote:
>Original Poster: Terry Fritz <twftesla-at-uswest-dot-net>
>
>At 10:56 AM 5/16/99 -0400, you wrote:
>
>snip  
>
>>I've had my eye on an oil burner transformer whose output is 9kv at 60ma. 
>>Cost is $35.00 at Home Depot. You will find it in the plumbing department, 
>>near the pvc pipe.
>>
>>Rich Sebzda, With Adam & Kevin in the caboose.
>>Your friendly neighborhood catscan repairman.
>>
>
>WOW!  I assume if you by two and run them out of phase, you would have
>18kV/60 mA ??  For $140 you could get 18kV at 120mA (by using four) which
>would be the limit one could run off 120VAC.  That would be a lot of bang
>for the buck for new equipment!
>
>	Terry
>
>
>

• Prev: Re: dumb MMC question
• Next: Re: TC Critical Coupling (was Overcoupling
• Index(es):
  • Main
  • Thread