Re: Needed - Neon Transformer -Reply

• To: tesla-at-pupman-dot-com
• Subject: Re: Needed - Neon Transformer -Reply
• From: Marius Grigoriu <compwiz-at-stratos-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 17 May 1999 17:13:53 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

How would you wire them up to get 120ma or even 18kv and 60ma?
Can you inclue an ASCII diagram?

thanks
Marius Grigoriu

On Sun, 16 May 1999, Tesla List wrote:

> Original Poster: Terry Fritz <twftesla-at-uswest-dot-net>
> 
> At 10:56 AM 5/16/99 -0400, you wrote:
> 
> snip  
> 
> >I've had my eye on an oil burner transformer whose output is 9kv at 60ma. 
> >Cost is $35.00 at Home Depot. You will find it in the plumbing department, 
> >near the pvc pipe.
> >
> >Rich Sebzda, With Adam & Kevin in the caboose.
> >Your friendly neighborhood catscan repairman.
> >
> 
> WOW!  I assume if you by two and run them out of phase, you would have
> 18kV/60 mA ??  For $140 you could get 18kV at 120mA (by using four) which
> would be the limit one could run off 120VAC.  That would be a lot of bang
> for the buck for new equipment!
> 
> 	Terry
> 
> 
> 

• Prev: Re: Secondary Theory (Was Bipolar Coil)-Heretical view
• Next: Re: using oil-burner transformers
• Index(es):
  • Main
  • Thread