Secondary Wire Type

• To: tesla-at-pupman-dot-com
• Subject: Secondary Wire Type
• From: "aspid" <aspid-at-netzero-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 10 May 1999 18:10:21 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

I'm planning on building a 4.25" x 18" secondary using AWG24. It will be
powered by a 15kv, 30 ma NST, which may get parelleled in the future. I
found some wire with the following specs: "An enamel coating gives this wire
good moisture and heat resistance, so it can be used in hermetic motors.
Wire meets NEMA 1000 MW-73 and MW-35, and is rated at 7,500 VAC. Temperature
rating 200° C." Is this OK?


thanx

Adam Minchey
aspid-at-netzero-dot-net
ICQ 9397016

________________________________________________________
NetZero - We believe in a FREE Internet.  Shouldn't you?
Get your FREE Internet Access and Email at
http://www-dot-netzero-dot-net/download/index.html

• Prev: Re: OZONE !!!!!! ( Warning, length )
• Next: Re: Secondary Wire Type
• Index(es):
  • Main
  • Thread