Re: DC Coil

• To: tesla-at-pupman-dot-com
• Subject: Re: DC Coil
• From: Chris Tominkson <internetinbox-at-yahoo-dot-com> (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Sun, 21 Mar 1999 22:45:49 -0700
• Approved: twf-at-verinet-dot-com

Wouldn't a DC coil be  alot easier on capacitors? Since one mil of PE
will stand 600 volts, you would only need  30 mils to withstand 18,000
volts. 




---Tesla List <tesla-at-pupman-dot-com> wrote:
>
> Original Poster: "Coiler" <mycroft-at-access1-dot-net> 
> 
> Greg, or anyone else out there that has done DC..
> I am mulling over the possiblility of building a DC coil, but I most
> certainly
> do not have 3ph power. I'd like to discuss this issue offline, I'll
bring
> results back to the list when (and if) I get the beast built.
> 
> I am curious if I were to build a full bridge rectifier, what I should
> expect my filtering cap needs would be, as well as how I would protect
> the filter cap and diode array from kickbacks.
> 
> 
> Thanks
> 
> 
> Michael Baumann
> Coiler, Homebrewer, Nerd. mycroft-at-access1-dot-net
> 
> 
> 

==
...Courtesy of Yahoo! Mail...

_________________________________________________________
DO YOU YAHOO!?
Get your free -at-yahoo-dot-com address at http://mail.yahoo-dot-com

• Prev: Re. Started winding today (rolled cap poly thickness)
• Next: Re. Need some input (bypass cap/safety gaps)
• Index(es):
  • Main
  • Thread