Re: Doorknob caps...

To: tesla-at-pupman-dot-com
Subject: Re: Doorknob caps...
From: "jim lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twf-at-verinet-dot-com>)
Date: Tue, 16 Mar 1999 11:59:41 -0700
Approved: twf-at-verinet-dot-com

doorknob caps are generally a short squat white or cream colored cylinder,
any where from an inch to 3 inches in diameter and an inch or two long. They
often have a tapped hole in each end, or a solder lug.  Try looking for
Ceramite's web site (perhaps http://www.ceramite-dot-com/ ), as they are a
manufacturer of these. Also, RF parts in San Marcos CA carries them and may
have a picture or drawing on their web site.

-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Tuesday, March 16, 1999 6:22 AM
Subject: Doorknob caps...

>Original Poster: "chris morgan" <crmorgan-at-hotmail-dot-com>
>
>
>I took apart an old Zenith the other day and the only thing close to HV
>caps I could find was 2 caps rated at 470uF and 200V (dosn't say AC or
>DC)Are these doorknob caps?  If not, what should I be looking for?
>These look like rolled caps, and mesure 1" diameter by 1 1/2" high.
>Also, what can I do w/ the flyback transformer?
>
>Chris, via the inter-thingy
>
>Get Your Private, Free Email at http://www.hotmail-dot-com
>
>