[Prev][Next][Index][Thread]

High Potential Terminal



One terminal on the capacitor I am planning to use in my tank circuit is
labeled " High Potential Only". Can any one tell me where in the circuit I
should connect this terminal? Would it be the NST/Spark Gap side or the
primary side. It seems to me that they would both be at a high potential.

Michael Doyle - Lab Technician
Cherry Electrical Products
11200 88th Ave, P.O. Box 581913
Pleasant Prairie, WI  53158-0913
Phone: (414) 942-6627
Fax: (414) 942-6334
EMAIL: mdoyle-at-cherrycorp-dot-com <mdoyle-at-cherrycorp-dot-com> 
http://www.cherrycorp-dot-com/ <http://www.cherrycorp-dot-com/>