Re: PVC diameter and cap question

• To: tesla-at-pupman-dot-com
• Subject: Re: PVC diameter and cap question
• From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 10 Jun 1999 18:31:55 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

SDR also comes in white... I just scavenged a nice 10" diam piece about 5'
long from the guys working on the landscaping at the bottom of my street.
How do I know it is SDR? It is stamped on the side.

-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Wednesday, June 09, 1999 9:41 PM
Subject: Re: PVC diameter and cap question


>Original Poster: Don Allen <dona-at-amigo-dot-net>
>
>At 01:14 PM 6/8/99 -0600, Tesla List wrote:
>>Original Poster: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net>
>>
>>to: Don
>>
>>Go to any large plumbing supply wholesale shop and ask for SDR  -- stands
>>for Sewer & Drain.  This is a thin-walled green colored PVC pipe and makes
>>great coils.  At wholesale suppliers it's sold in 20 ft. lengths.
>>
>>Regards,
>>
>>Dr.Resonance
>
>To Dr. Resonance and Alan
>
>I hadn't considered SDR, but it sounds like a winner. I will definately
check
>it out. If
>the irrigation supply house I contacted doesn't have it in stock, I will
have
>them order
>some for me.
>
>Thanks,
>
>Don
>
>
>---
>
>"Resistance to tyrants is obedience to God" - Thomas Jefferson
>
>
>

• Prev: Re-test of 120bps vs. 240bps comparison
• Next: Re: Bang size and break-rate
• Index(es):
  • Main
  • Thread