RE: cap specs

• To: tesla-at-pupman-dot-com
• Subject: RE: cap specs
• From: "Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 07 Jun 1999 17:32:29 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Oops..  Forgot to recommend doubling the C and running two in series for
9kv...

Brian D. Basura

-----Original Message-----
From: Tesla List [mailto:tesla-at-pupman-dot-com]
Sent: Saturday, June 05, 1999 7:07 AM
To: tesla-at-pupman-dot-com
Subject: cap specs


Original Poster: "Kevin Wahila" <knw2-at-lehigh.edu> 

i know this is going to be a broad question, but here it is.  i have lots of
6mil poly, rolls of 14" wide al flashing and a 9kV 90 mA voltage source,
could someone help steer me in the right direction as to dimensions for a
rolled poly cap, considering series combinations?

thanks
kevin wahila

p.s.  just a side note, but i have collected several neon transformers and
unpotted them, soaked them in gasoline then let them dry.  i found that the
tupperware containers that are made to fit 1/2 gallon ice creams work
wonderfully to house them.

• Prev: Re: MMC question
• Next: Re: Vtop vs coil length
• Index(es):
  • Main
  • Thread