[Prev][Next][Index][Thread]
Re: MMC caps?
The info on the cap reads as follows:
6n2 J 2000v PHILIPS
376 KP/MMKP HQ 91 17
Aron
----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Re: MMC caps?
> Date: Friday, June 04, 1999 8:51 PM
>
> Original Poster: "Steve Young" <youngs-at-konnections-dot-com>
>
> Aron,
>
> Sounds delicious! What is the source? Can you tell us the other specs
for
> these caps, such as DV/DT and AC voltage ratings? Yes, use them in a
> larger coil, but you probably will want to at least double the number of
> caps in each string if you run with a 12 or 15 KV NST.
>
> --Steve
>
> ----------
> > From: Tesla List <tesla-at-pupman-dot-com>
> > To: tesla-at-pupman-dot-com
> > Subject: MMC caps?
> > Date: Thursday, June 03, 1999 10:58 PM
> >
> > Original Poster: "Aron" <kc5uto-at-wt-dot-net>
> >
> > I found a good source of .0062uf 2kvdc caps for a good price. I used 5
> > strings of 6 with a 9kv 30ma neon and got 12" arcs out of my 3" tc. I
> would
> > think I am over powering them, but they don't even get warm on long
runs.
> > Would it be particle to use these for a larger coil? Also, I can get
> great
> > number of them (1000's) cheap.
> >
> >
> >
>