Re: Caps in series
Total series capacitance is:
C1...n=each individual capacitance
See my HV Haven (it does NOT do jusctice!)
On Wed, 30 Jun 1999 22:20:13 -0600 Tesla List <tesla-at-pupman-dot-com> writes:
>Original Poster: Erthwin-at-aol-dot-com
>I know that if I wire two 5Kv .01uF capacitors in series I'll end up
>10Kv .005uF cap but what happens when I put in a third capacitor that
>same ratings? does the uF rating drop by half again (15Kv .0025) or is
>of the original rating now (15Kv .00333~)...or is there a completely
>different set of equations for finding this out? I ask this because
>planning on looking for some smaller voltage caps to wire in series
>the other visits I've made to my local surplus I doubt I'll find
>close to what I actually need so I might end up wiring a LOT of caps
>parallel and in series to get the values I'm looking for.
>Left, left I hadda good brain but it left...
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno-dot-com/dynoget/tagj.