Re: Mini Tesla

• To: tesla-at-pupman-dot-com
• Subject: Re: Mini Tesla
• From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Fri, 01 Jan 1999 18:45:12 -0700
• Approved: twf-at-verinet-dot-com

to: Nick

Your cap is way too large.  Are you sure that isn't a .01 MFD cap?   

DR.RESONANCE-at-next-wave-dot-net


----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Mini Tesla
> Date: Thursday, December 31, 1998 6:35 PM
> 
> Original Poster: NickandSim-at-aol-dot-com 
> 
> To All,
>           I have built a little 6in by 1.5in tesla with a flat spiral
primary.
> I have calculated the windings etc. with tc-cad and they all match
(resonant
> freq. 1.457Mhz).  It has a 4in by 1in toroid and runs off a 3kv
transformer
> with a 0.1 uf cap and a 4mm spark gap.  I would appreciate any advice on
small
> teslas as the performence is not quite up to scratch.
> 
>                                              Nick Field 
> 

• Prev: Re: Toroid Design .
• Next: webpage software
• Index(es):
  • Main
  • Thread