RE: Building your own HV transformer

• To: tesla-at-pupman-dot-com
• Subject: RE: Building your own HV transformer
• From: "Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Thu, 25 Feb 1999 19:11:27 -0700
• Approved: twf-at-verinet-dot-com

Note that the first sentence say's "This design is untested".  That becomes
pretty obvious when you read the directions....

Brian D. Basura


-----Original Message-----
From: Tesla List [mailto:tesla-at-pupman-dot-com]
Sent: Wednesday, February 24, 1999 9:27 PM
To: tesla-at-pupman-dot-com
Subject: Building your own HV transformer


Original Poster: Chris Tominkson <internetinbox-at-yahoo-dot-com> 

I was looking at this page:
http://members.tripod-dot-com/~dbrunner/hvxfmr1.htm

That tells you how to makea high voltage transformer, that puts out 24
Kilovolts, 1.something Amps. Sounds pretty simple, but I am still
confused on the position of the iron rods. It sounds like in this
transformer, they are not directly across from each other, but on the
same rod, and across from each other?Something weird like that.

Any one know?

Thanks.

Chris.




==
...Courtesy of Yahoo! Mail...

_________________________________________________________
DO YOU YAHOO!?
Get your free -at-yahoo-dot-com address at http://mail.yahoo-dot-com

• Prev: Re: Mineral Spirits
• Next: RE: Fw: An anniversary celebration
• Index(es):
  • Main
  • Thread