[Prev][Next][Index][Thread]

RE: Cheap DMM



Yes flukes are good, I looked at my friends fluke automotive mm today,
but when I think of fluke, I think  of expensive.


---Tesla List <tesla-at-pupman-dot-com> wrote:
>
> Original Poster: Kerry Jarrell <Kerry-at-apprentice-dot-com> 
> 
> well $60 is a good price, but you get what you pay for, I would save
and get
> a good one it will last longer and be more accurate......I paid 150
for mine
> and it does not measure caps, but that was 1.5 years ago, I
recommend fluk,
> they will last for a good long time, and once calabrated they only
need to
> be calabrated 1 every to years if you dop not beat them up and it is
not
> subject to altatude and hudimity changes....that is you just use it
at home,
> if you travel all over the country with it you need to calabrate it
once
> every 6 months just to make sure it is accurate, but that is realy
strict
> type of policy
> 
> kerry
> 
> 
> -----Original Message-----
> From: Tesla List [mailto:tesla-at-pupman-dot-com]
> Sent: Sunday, February 21, 1999 7:03 PM
> To: tesla-at-pupman-dot-com
> Subject: Cheap DMM
> 
> 
> Original Poster: Chris Tominkson <internetinbox-at-yahoo-dot-com> 
> 
> Does anybody know where you can get a cheap digital multimeter that
> can measure capacitance? The cheapest I have seen have been around
> sixty dollars and up. Thanks.
> 
> 
> 
> 
> ==
> ...Courtesy of Yahoo! Mail...
> 
> _________________________________________________________
> DO YOU YAHOO!?
> Get your free -at-yahoo-dot-com address at http://mail.yahoo-dot-com
> 
> 
> 

==
...Courtesy of Yahoo! Mail...

_________________________________________________________
DO YOU YAHOO!?
Get your free -at-yahoo-dot-com address at http://mail.yahoo-dot-com