[Prev][Next][Index][Thread]

another pole pig query



I thank everyone who responded to my last pole pig post! I learned 
valuable info from it!

My new question: I have been long debating how to ballast it. I dont 
really want to spend $$$ on a welder. I cam up with another possibility. 
Between myself and a friend, we can come up with a number of huge 10 ohm 
power resistors. These appear to be able to take considerable wattage, 
hooked them across 120V (thats 1.44kW). I figure I can get the right 
ballast (240V) by using a bank of 4 of these in parallel (2.5 ohms) in 
series with a similar bank (5 ohms total). That would limit the current 
to fourty-some amps I think. Does anyone know how much V I will loose on 
the pig by using these R's for ballast? Any other thoughts on R ballast 
in general? Remember this ballast idea is free (already have the R's). 
The specs for the pig again is 240V input, 19,920V output 10kVA.

Thanks,
Tristan Stewart,KC2EBM

______________________________________________________
Get Your Private, Free Email at http://www.hotmail-dot-com