Re: rotary spark gap

• To: tesla-at-pupman-dot-com
• Subject: Re: rotary spark gap
• From: Thomas Gstrein <thomas.gstrein-at-stwimst.at> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 29 Dec 1999 11:36:51 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hello. Is an air motor from a Personal computer an sychronous or a
nonsynchronous motor? (DC12V, 6W) Can I use the RSG with DV from an
rectifierer, if there is an neon befind that rectifier? Or can I use a
safety gap parallel to the neon and the capacitor(3.3nF, 40KV)? Thanks a
lot.
yours Tom

Tesla List schrieb:
> 
> Original Poster: Grayson B Dietrich <electrofire-at-juno-dot-com>
> 
> On Tue, 28 Dec 1999 11:50:51 -0700 Tesla List <tesla-at-pupman-dot-com> writes:
> > Original Poster: Thomas Gstrein <thomas.gstrein-at-stwimst.at>
> >
> > Hello. Can I use a rotary spark gap with a NST?
> >
> >
> Thomas,
> 
> Yes, you can. It needs to be an AC-synchronous unit so each electrode
> presentation will fire, and will still stress the heck out of the NST,
> but yes, it can and will work. I use a 120bps 1800rpm SRSG with a 12/60
> NST in my coil.
> 
> Regards,
> 
> Grayson Dietrich
> http://www.electrophile.8m-dot-com

• Prev: Re: capacitor
• Next: Re: 20KV 1 Amp connectors
• Index(es):
  • Main
  • Thread