Re: rotary spark gap

• To: tesla-at-pupman-dot-com
• Subject: Re: rotary spark gap
• From: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Tue, 28 Dec 1999 16:57:10 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Only if is a true synchro RSG.  A standard non-synchro RSG will blow the NST
in short order.  An 1800 RPM  4 electrode synchro RSG running 2 gaps on each
side of the rotor wheel (4 total gaps) all series connected seems to work
great with a NST.  Be sure to use resistor-capacitor protection on each
bushing of your NST (see the archives section for a schematic of this).

Regards,

Dr. Resonance


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Tuesday, December 28, 1999 2:11 PM
Subject: rotary spark gap


>Original Poster: Thomas Gstrein <thomas.gstrein-at-stwimst.at>
>
>Hello. Can I use a rotary spark gap with a NST?
>
>
>

• Prev: Re: Tesla's Energy Trans.
• Next: Re: Telephone line interference
• Index(es):
  • Main
  • Thread