RE: Unknown Rectifier

• To: tesla-at-pupman-dot-com
• Subject: RE: Unknown Rectifier
• From: "Pat Manning" <p.manning-at-snet-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 22 Dec 1999 17:48:03 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Another EDI part--

40kV PIV, 700mA Ifwd avg, 300nS recovery rectifier.

See:  http://www.edidiodes-dot-com/HiVoltage/KVP_RVP.html

Best

Pat

Patrick Manning
Engineering Specialist
Manitou Systems Inc.

(V)(203) 792-8797 x315 
(F)(203) 792-7097
pmanning-at-manitousys-dot-com

> -----Original Message-----
> From: Tesla List [mailto:tesla-at-pupman-dot-com]
> Sent: Wednesday, December 22, 1999 5:02 AM
> To: tesla-at-pupman-dot-com
> Subject: Unknown Rectifier
> 
> 
> Original Poster: Brian H Le Page <b.h.le-page-at-surrey.ac.uk> 
> 
> 
> All
> 
> Yes it is another 'what is it?' post.  I came across some black 
> prism shaped
> components 6.5 inches long by 0.75 inches square.  The two terminals are
> about 0.5 inch in from each end on one long surface (one at each 
> end).  The
> writing says:
> 
> RVP 40
> EDI 7008
> 
> With the symbol for a diode beneath that.  They were made up into 
> a bridge.
> Any help appreciated.
> 
> Have a good Christmas break.
> 
> 
> Dr B.
> 
> Dr Brian H Le Page
> Composites Research Group
> School of Mechanical and Materials Engineering
> University of Surrey
> Guildford
> GU2 5XH
> 
> 

• Prev: Re: Series or Parallel resonant ? ( was: New pics and scope waveforms)
• Next: Re: RSG question
• Index(es):
  • Main
  • Thread