[Prev][Next][Index][Thread]
Re: Polyethylene Washers ?????
-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Tuesday, December 14, 1999 6:22 AM
Subject: Polyethylene Washers ?????
>Original Poster: gweaver <gweaver-at-earthlink-dot-net>
>
>Does anyone know where I can buy some polyethylene washers?
>
>I have looked in McMaster Carr, WW Granger and a few other places and have
>found plastic washers but can not find out if they are differently made out
>of polyethylene.
>
><snip>
>
>Gary Weaver
>
>
I like a company called BOKER'S, they will make you anything
you want in the way of washers. This assumes you want enough identical
washers to justify the trouble ordering them.
http://www.bokers-dot-com/washers.cfm
For off the shelf poly washers, one of the biggest companies is in
Colorado. They have an informative web page.
http://www.pspglobal-dot-com/nfcompany.html
Another possibility is:
http://www.seastrom-mfg-dot-com/Pages/non-metallicwashers.html
If you just need a few, I would find some stock and punch or hole saw them
out yourself. I have hole-sawed insulating washers from
polyethylene kitchen cutting boards I picked up at the"Dollar" store.
For small washers and spacers, I cut up poly tubing with a razor
blade.
Keep us informed on the Capacitor progress!