Suggest a Design Please

• To: tesla-at-pupman-dot-com
• Subject: Suggest a Design Please
• From: Norman Hockler <norsan-at-bright-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Tue, 14 Dec 1999 21:48:02 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi Coilers,

Can someone suggest a design using the parts I have on hand, which are:

15kv -at-30ma NST
4" PVC thin wall pipe  (OD is 4.1875)
Plenty of 26 awg magnet wire for secondary.
5/16 copper tubing for primary (or most any other wire)

Seems best to start out with basic static gap  ( Yes...No ???)

suggestion for cap  value in uf??

I see reference to Wintesla program...where can I get a copy???  Are there 
other programs available to calculate values??

Any suggestions will be appreciated

Thanks,  Norm

• Prev: Basic Tesla Info..
• Next: Re: Polyethylene Washers ?????
• Index(es):
  • Main
  • Thread