Re[2]: Sealing Plexiglas

To: tesla-at-pupman-dot-com
Subject: Re[2]: Sealing Plexiglas
From: pmathus-at-learningco-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Date: Fri, 10 Dec 1999 17:30:27 -0700
Approved: twftesla-at-uswest-dot-net
Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

     i think, from what i've heard, that you want to stay as far away from 
     water based varnish as possible, since the idea of the sealing is to 
     keep water out of the coilform.
     
     but i could be wrong. . . 
     
     paul


______________________________ Reply Separator
_________________________________
Subject: Re: Sealing Plexiglas
Author:  Tesla List <tesla-at-pupman-dot-com> at InterNet
Date:    12/10/99 2:15 PM


Original Poster: "jw" <jwhitmor-at-muscanet-dot-com> 
     
     <snip>
     
I too have purchased a rather expensive piece of acrylic tubing. 
and am experimenting with a sealer that has not been mentioned yet.
     
     It is  the new class of non-yellowing WATER based acrylic varnish, 
     marketed as "environmentally friendly" clear wood finish. 
     
     
     <snip>