Re: drying coil forms

To: tesla-at-pupman-dot-com
Subject: Re: drying coil forms
From: "Steve Cook" <Steve-at-g8cyerichmond.freeserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Date: Wed, 08 Dec 1999 18:40:04 -0700
Approved: twftesla-at-uswest-dot-net
Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Whilst glass does not absorb water into it's structure, at normal room
temperatures and levels of humidity, a thin film of water only about a
molecule thick does form on the surface. Coating the surface with PU varnish
will displace this, altternatively if the temperature of the glass can be
held a little higher, the water evaporates.
----- Original Message -----
From: Tesla List <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, December 08, 1999 1:16 PM
Subject: Re: drying coil forms


> Original Poster: Robin Copini <rcopini-at-merlin-dot-net.au>
>
> Hi Marco,
>
>  Ever seen those yuppie glass containers for pasta, I've seen them here in
Oz
> standing almost 3 feet high and 8 inches diameter - so you can get large
glass
> forms if you insist on using glass.
>
> regards
>
>  Robin in OZ.
>
> Tesla List wrote:
>
> > Original Poster: Marco McClean <memo-at-mcn-dot-org>
> >
> > Tesla List wrote:
> >
>
> <big snip>
>
> >
> >
> > coil form. The problem is-- where to get a big, perfect, glass cylinder?
> >
>
>
>
>
>