[Prev][Next][Index][Thread]
Re: LOW VOLUME
-
To: tesla-at-pupman-dot-com
-
Subject: Re: LOW VOLUME
-
From: Terry Fritz <twftesla-at-uswest-dot-net>
-
Date: Mon, 06 Dec 1999 22:40:07 -0700
-
Approved: twftesla-at-uswest-dot-net
-
Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme
-
In-Reply-To: <3.0.6.32.19991207030621.007b47d0-at-mail.hurontel.on.ca>
At 03:06 AM 12/07/1999 +0000, you wrote:
>
>Hi Coilers:
>
>Is it just me, or has there been a marked decline in the volume of
>messages here on the SIG lately? Maybe everyone's too busy with
>Christmas shopping!
In my case, it is the "real job" taking my time ;-) The number of posts
per day ranges from a few to 60+ at times depending on all sorts of things...
>
>I'm well along with my second coil. Four by sixteen secondary with
>an 11" x 4" toroid top load, 15 degree 1/4" tube saucer primary,
>RQ multi-gap, mica cap, and two OBIT's for power.
That sounds good :-)
>
>I managed to fry one of the OBIT's setting the safety gaps, but I've
>got access to lots more. Is 100 pF. across the safety gaps OK when
>using a pair of pancake chokes wound of # 22 on a 2" OD teflon form?
100pF should not hurt anything. "I" am not a strong believer in chokes but...
Cheers,
Terry
>
>
>73, Weazle, VE3EAR/VE3WZL
>
>Listening: 147.030+ and 442.075+
>E-mail: weazle-at-hurontel.on.ca
> or ve3ear-at-rac.ca
>Web site: www.hurontel.on.ca/~weazle
>