[Prev][Next][Index][Thread]
Re: drying coil forms
Why does PVC have to be dried at all. Is it not plastic? Is it not
impervious to moisture? What am I missing here?
Tesla List wrote:
>
> Original Poster: "Herwig Roscher" <herwig.roscher-at-gmx.de>
>
> Paul,
>
> > 1) does anybody have any good drying techniques/setups they'd be
> willing to share?
> I've (mis)used our sauna for this job. Just below the ceiling the
> temperature was 95 deg Celsius = about 200 deg Fahrenheit. I've dryed the
> form for one hour and coated it while it was still warm.
>
> Herwig