Re: drying coil forms

• To: tesla-at-pupman-dot-com
• Subject: Re: drying coil forms
• From: Eddie Burwell <eburwell-at-HIWAAY-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 03 Dec 1999 18:15:01 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

At 06:27 PM 12/2/99 -0700, you wrote:
>Original Poster: pmathus-at-learningco-dot-com 
   
>     1) does anybody have any good drying techniques/setups they'd be 
>     willing to share?

Here's a theory to mull over: you could buy a box of epsolm salt (or some
other desiccant) and bake it dry in an oven at 300F or so. Let the epsolm
salt cool put it in a cloth or paper bag and seal it in a trash bag with
your coil form.  


Heating would probably pull out the moisture faster, but this would not have
the risk of warping or setting afire your coil form.


Eddie Burwell
 

• Prev: MMC Caps
• Next: RE: TESLA PAPERS
• Index(es):
  • Main
  • Thread