Re: Coil success on first big run - but (help) safety gap fires alot!

• To: tesla-at-pupman-dot-com
• Subject: Re: Coil success on first big run - but (help) safety gap fires alot!
• From: Robert Volk <smrtmny2-at-earthlink-dot-net> (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Thu, 22 Apr 1999 15:59:55 -0600
• Approved: twf-at-verinet-dot-com

Could you describe this with a little more detail?
Bob Volk



> With so few turns, 1/4 of a turn could make a significant difference.  My 
> setup tunes at about 10 turns and is fairly sharp in tuning.  I use a tuning 
> coil for fine tuning it. It has 10 turns and measures about 1 uH, or about 
> the equivalent of one outer turn if all 10 turns are tapped.  I found
this to 
> be much easier than trying to tap around the primary coil.

• Prev: Toroid Material
• Next: Re: MMC take2
• Index(es):
  • Main
  • Thread