Re: Secondary Inductance (fwd)

To: tesla-at-pupman-dot-com
Subject: Re: Secondary Inductance (fwd)
From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <twf-at-verinet-dot-com>)
Date: Sun, 18 Apr 1999 08:48:57 -0600
Approved: twf-at-verinet-dot-com

Hi Mark,

> ---------- Forwarded message ----------
> Date: Thu, 15 Apr 1999 07:46:34 -0500
> From: "Mark S. Rzeszotarski, Ph.D." <msr7-at-po.cwru.edu>
> To: tesla-at-pupman-dot-com
> Subject: Secondary Inductance

<snip> 
> Since output voltage is directly proportional to the turns ratio even for
> air core coils, pushing the H:D a bit buys you a little more voltage if you
> can withstand the voltage rise along the secondary.
> 
> Regards,
> Mark S. Rzeszotarski, Ph.D.

Suppose I have two primaries for the same secondary. Both have the 
same inductance but different height and diameter such that primary A 
has 3 turns and primary B has 8 turns. How does the turns ratio 
argument above stack up?

Regards,
Malcolm