[Prev][Next][Index][Thread]

RE: Rolled PE Caps



You can find restaurant quality foil at "Smart & Final" (If you are in the
US that is...)

Regards,
Brian D. Basura


-----Original Message-----
From: Tesla List [mailto:tesla-at-pupman-dot-com]
Sent: Sunday, April 11, 1999 5:28 PM
To: tesla-at-pupman-dot-com
Subject: Re: Rolled PE Caps


Original Poster: jgd <johngd-at-bellsouth-dot-net> 



Tesla List wrote:

> Original Poster: "Kevin Wahila" <knw2-at-lehigh.edu>
>
> where do you get heavy duty aluminum foil from?  did you make your foil
come
> out the edges or on the ends?  how do you make a connection when the foil
> comes out on the ends?
> thanks much
> kevin wahila

The really heavy stuff is a restaurant commodity.  This stuff is  thick
enough
to administer a cut if handled incorrectly.  Check your yellow pages for
restaurant suppliers.  Make sure you ask for "heavy duty" foil.  If none are
available (most operate out of major cities and have large minimum orders
for
delivery.), then check with your favorite restaurant and ask about ordering
some.  The only down side is it  comes in BIG (moderately expensive) rolls -
about 10 lbs.  On the up side, it is strong enough to make shallow pans so
if
you wanna make some chili after you melt out your NST on your gas grill,
you can
do so in a foil pan.

John
--
John De Armond
johngd-at-bellsouth-dot-net
Neon John's Custom Neon (and John G's BBQ Restaurant)
"Bendin' Glass 'n Passin' Gas"